Model Ship Builder :: Forums :: Build Logs :: POB Build Logs |
|
<< Previous thread | Next thread >> |
Amati's Bluenose |
Go to page 1 2 3 4 5 6 7 | |
Moderators: Winston, aew, bikepunk
|
Author | Post | ||
RicksBuildII |
| ||
![]() ![]() Registered Member #927 Joined: Wed May 12 2010, 01:04amPosts: 35 | OK, finally got the courage to dive in and here's the starting shot. I hope I've posted this build in the right place, I'm new on the terminology but I believe I'm working on a Plank on Bulkhead. I'll post more photos as I progress. Any feedback, tips or tricks are greatly appreciated as this is my first ship build.![]() [ Edited Tue Jan 17 2017, 01:06pm ] | ||
Back to top | | ||
DeaD_Peter |
| ||
![]() ![]() Registered Member #565 Joined: Sat Dec 26 2009, 03:12amPosts: 32 | Yup, it's a POB kit and yes it's in the right place. You may want to make a small "holding stand" or cradle, also, the distance between the bulkheads is alittle large, many builders will fill in the empty spaces with balsa wood blocks so the planks have more surface area to hold onto when planking, (much less chance distorted or warped planking = less sanding and filling later) Good start, feed us more pictures as you get more done. | ||
Back to top | | ||
Winston |
| ||
winston![]() ![]() ![]() Registered Member #1 Joined: Sat Jun 13 2009, 02:08pmPosts: 2246 | That is quite a spacing between the bulkheads. I would definitely add some filler blocks too. You could use any scrap wood for it but Balsa would probably be the easiest to sand down and shape. | ||
Back to top | | ||
RicksBuildII |
| ||
![]() ![]() Registered Member #927 Joined: Wed May 12 2010, 01:04amPosts: 35 | Here's what a lazy Sunday can produce. I have to admit, the deck planking kinda scared me at first but it was fun as h*ll. Thanks for the tips on the stand and filler blocks guys, I'll look around locally and see if I can find something. I'm sure my local hobby shop should have pieces of balsa or maybe I can make use of the wood the pieces were cut from. Dave ![]() | ||
Back to top | | ||
RicksBuildII |
| ||
![]() ![]() Registered Member #927 Joined: Wed May 12 2010, 01:04amPosts: 35 | Hi Everyone, sorry I haven't updated in a bit, a long weekend set in and I got off track. I've now completed the first hull planking and I have to say I'm pretty impressed for a first timer. I'll have to do some minor wood filling and sanding to get it prep'd for the 2nd layer. I also saw on another build site that someone had written a little something on the bulkhead before applying the planking. Seeing as this project is a dedication to the Bluenose model my father never got a chance to complete I thought I'd do the same thing. Maybe someone will x-ray it in 100 yrs LOL I want to thank you both for your tips before planking but I decided not to do that. This is my first model and I'm really inexperienced at that kind of thing so I went with what was supplied. I was worried I'd make it look pregnant or something if I didn't cut the balsa right, etc... I do appreciate your tips, even though I didn't use the last ones, so keep em coming when you see fit. I'll post more pics when I get the 2nd layer of planking on. Dave RicksBuildII P.S. I went looking for the pics that were taken during the planking and the photo of the bulkhead inscription and apparently I was a moron and deleted them off the camera before copying to the PC. ![]() ![]() ![]() | ||
Back to top | | ||
RicksBuildII |
| ||
![]() ![]() Registered Member #927 Joined: Wed May 12 2010, 01:04amPosts: 35 | PAINTING TIPS NEEDED: Hi everyone, I'm looking to see if anyone might be able to pass along some tips when it comes to painting my Bluenose. This is my first build and I'm a little paranoid about missing a crucial step in the process and having to find a band-aid solution later. I'm in the process of applying the 2nd layer strips on the hull and I'm wondering if once I'm done, is this the time to consider painting? I'm hoping to get some advice like: "When the hull is complete, sand, apply primer, set waterline, paint balance, go back to build... OR wait until all is complete" or additional info like "Before assembling cabin, etc... paint pieces then assemble... OR assemble then paint?" or "Is using a brush to paint OK or should I splerge for an air brush kit?" These are 3 examples of some of what I'm hoping to learn, I just made those up so if they're off that's why. I've just come from the hobby shop and purchased different sizes of brushes, some primer, masking tape, and the paint colours (Model Master Acryl) I'll require for the model based on the practicum, thanks to the members who pointed me to it. I hope I got the right stuff. Anyhow, any insight would be appreciated if ya have a moment. Take care. Dave | ||
Back to top | | ||
DeaD_Peter |
| ||
![]() ![]() Registered Member #565 Joined: Sat Dec 26 2009, 03:12amPosts: 32 | Well, I had hoped more experienced people would have responded, to my questions as well. So I'll give it a try. Sand the second planking, putty, sand, then when happy with that result continue with most of the rest of the ship. Personally I like the all wood look, but would paint as close to the last stages on everthing. But, some things are best if painted before hand, you will need to decide when it's the best time to paint. An airbrush won't be needed, hand painting works well on wooden kits, but if you want to get one then do so. Fittings or other items that are to remain their natural wood colour can be sealed at any time, I seal things as soon as I can due to all the handeling of the ship and other parts during the different work stages. Hope this helps alittle. | ||
Back to top | | ||
RicksBuildII |
| ||
![]() ![]() Registered Member #927 Joined: Wed May 12 2010, 01:04amPosts: 35 | Alright, second planking is on, I've sanded it a bit. I just have to wood fill a few spots, sand and then.... Not sure LOL. I'm thinking I should paint this at this stage to avoid it getting messy trying to paint it full assembled. Any thoughts? ![]() ![]() ![]() ![]() | ||
Back to top | | ||
Gene Bodnar |
| ||
![]() ![]() Registered Member #126 Joined: Tue Jul 21 2009, 11:20amPosts: 1782 | Dave, You're probably not getting an answer to your question because there are many, many ways to approach this issue. Experience and preference are your best teachers -- someone else may prefer a wholly different method. Here's what I do when painting is involved: Since I use acylic paint exclusive, I don't use primer. It is not necessary with acrylic paint. Sanding, yes, with two or three successively finer grits of sandpaper. Filler, yes, if required. Here, yes, cover filler with primer first. Anything that requires painting, in my opinion, should be at least partially painted before you install it on the ship, especially if it abuts against a part of a different color, including anything attached to the deck. For example, if your hull is painted black but your caprail is supposed to be white, paint the hull first, of course, but then paint the caprail BEFORE installing it. This avoids the use of any kind of tape, and it avoids the necessity of an extremely steady hand. Never wait for painting until after the item is installed. Sometimes, of course, you can wait, especially if you will have no problems painting it once it is installed. But keep thinking ahead every step of the way. If waiting until later poses a potential difficulty, do it now. By the way, I mark a waterline and then paint above and below this line free-handed with the required colors, trying to stay just above or below the waterline. However, I do not attempt to paint the waterline itself. I use pin-striping tape for all waterlines. It's available in a wide variety of colors and widths, either from auto supply stores or hobby shops. On-line, there's Model Expo. I've never done air-brushing so I don't have an opinion on that subject. I've been using good quality camelhair brushes and acrylic paint -- the kind in small plastic jars -- for many years. The key here is to apply thin coats of paint -- thick coats will indeed hide details. Apply a second thin coat, if needed. Sometimes, a light sanding may be required before the application of the second coat. Those are my opinions, for what they're worth. Hopefully, this may encourage other opinions, different from mine. By the way, your model looks great, especially for a first build. Keep at it. When you finish it, you will have a certain satisfaction that cannot be experienced in any other way. Good luck. Gene [ Edited Sun Jun 20 2010, 05:47pm ] | ||
Back to top | | ||
RicksBuildII |
| ||
![]() ![]() Registered Member #927 Joined: Wed May 12 2010, 01:04amPosts: 35 | Thanks Gene, that was exactly what I was looking for. That mixed with common sense tells me I should paint before adding other pieces. I just needed a reinforced opinion lol. I have a 1/16" masking tape I plan to use for the waterline. I'll draw a line with a devise I'll rig, paint it white, mask it, then apply the red & black accordingly. Peel off the tape and Voila! I'll be using brushes and paints based on the colour scheme from the practicum you guys directed me to. Thanks for compliment on the build, part of the credit has to go to the people who's help I've received from here along the way and the other builds I've peaked at on here. This place has been a tremendous help. Thanks again for the compliment, support & education. Off to paint LOL photos to come... | ||
Back to top | | ||
Go to page 1 2 3 4 5 6 7 | |
Powered by e107 Forum System