| Model Ship Builder :: Forums :: Modeling Types :: Computer Assisted Drafting (CAD) |
|
<< Previous thread | Next thread >> |
| Steamer Schooner Wapama | ||
| Go to page 1 2 3 4 | |
|
Moderators: Winston, aew, Donnie, bikepunk
|
| Author | Post | ||
| JosephH |
| ||
  Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | Hey guys im at a standstill on the Columbia having some problems in couple areas so I thought I would take a very short break from it to clear my head. I came across these excellent plans for the Steamer Schooner Wapama which have been corrected by a shipyard who had redone them with possibly restoring the ship. unfortunatley it was too far gone. all the offsets fit almost perfectly with the line drawings however there are 3 dimensions I cannot figure out. I am giving a link to all I have on the ship along with my excel sheet for the offsets and my curve files here is my problem I got all the curves tested in solidworks and they indead have been fixed up however I am missing the info for a couple dimensions to enter into the curves for the stations to complete them. I am missing the Half-Siding, the Deck Sheer and the Plank Sheer Dimensions to finish the curve files off properly http://www.proflooney.net/Steamer-Schooner-Wapama.zip it is The Steamer Schooner WAPAMA Circa 1915 above is zip file of everything I have its the drawings, an excell file I made of the offsets, and all the curve files I made for importing into Solidworks (unlike some other cad programs I have to make each curve file as a separate file these are some really really nice plans and I want do do a good job on it as its one of the few sets of drawings where i can actually understand them as a newbie to ship modelling. I just am having some problems at the moment figuring out what those 3 missing dimensions come from so I can enter them in the proper space in my tables one dimension is called a half-siding, the other 2 are the deck sheer and the plank sheer. if i can figure out where to get those 3 dimensions from ill be all set to go and start lofting up the hull. So if any of you offset gurus can be of help I would really appreciate it   [ Edited Mon Jan 02 2017, 07:03am ] | ||
| Back to top | | ||
| JosephH |
| ||
| Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | as you can see here by the blue lines the offsets come almost spot on | ||
| Back to top | | ||
| JosephH |
| ||
| Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | now taking a look at the last picture you can see the bottom and top of the curves are missing thats the 3 dimensions I cannot seem to get correct. for anyone wanting to bring the stuff into cad and play around with their own stuff here are the dimensions for resizing the image for proper full scale sheet 00006a i used for profile on the front plane and also for the stations on the right plane. I didnt cut the sheet I just used the wole sheet but the drawings are different scales thus the different szes. for profile view: Length: 3167.24720294in Height: 2446.57474368in For the Stations: Length: 2111.33276274in Height: 1630.92208528in using those dimensions when you do the curve files in cad program with the offsets I have in the excel file they match up perfectly | ||
| Back to top | | ||
| JosephH |
| ||
| Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | messing around trying to fudge the curves i got a semi loft from it but it wasnt correct so I have started over | ||
| Back to top | | ||
| JosephH |
| ||
| Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | from same site I got the really nice drawings for the 3 masted Schooner C.A. Thayer I uploaded in case anyone is interested http://www.proflooney.net/Schooner-Thayer.rar [ Edited Mon Jan 02 2017, 11:30pm ] | ||
| Back to top | | ||
| JosephH |
| ||
| Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | fixed the links I did the links wrong they work now | ||
| Back to top | | ||
| JosephH |
| ||
| Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | Ok I seem top have the Half-Siding Dimension however cant seem to get the Deck Sheer or Plank Sheer Numbers to work | ||
| Back to top | | ||
| JosephH |
| ||
| Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | Ok I got the bottom of the curve files fixed. I found the correct dimension for the lower portion but it was 10" and it should have been 9" all the way from station 1 1/2 to 9 so far and looking at the profile 9 1/2 will be the same. Station 1/2 will be at 12" and station 1 will be at 1- 1/2 inches once i can figure out what the heck to do abt the tops and the last 2 stations once they are all finished I will edit the offset table to correct it to match properly so that we have a proper table. like i said any help would be appreciated. Joe | ||
| Back to top | | ||
| bensid54 |
| ||
 Registered Member #2957 Joined: Wed Jun 13 2012, 05:43amPosts: 968 | I would be glad to help Joseph, I find your work amazing but as soon as you say computer I'm lost. Gene Bodnar is the guy you want to talk to he is our ship Guru you might say. | ||
| Back to top | | ||
| JosephH |
| ||
| Registered Member #4876 Joined: Fri Dec 23 2016, 03:37amPosts: 996 | Well after all day of messing around I got every station but the last 2 to work out. once I update the files with the corrections I will upload a fixed version | ||
| Back to top | | ||
| Go to page 1 2 3 4 | |
Powered by e107 Forum System